Air Tank Kit

4 Trumpet Air Horn Compressor Tank Gauge Kit 1.6Gal 150PSI Fits Train Truck Van


4 Trumpet Air Horn Compressor Tank Gauge Kit 1.6Gal 150PSI Fits Train Truck Van
4 Trumpet Air Horn Compressor Tank Gauge Kit 1.6Gal 150PSI Fits Train Truck Van
4 Trumpet Air Horn Compressor Tank Gauge Kit 1.6Gal 150PSI Fits Train Truck Van
4 Trumpet Air Horn Compressor Tank Gauge Kit 1.6Gal 150PSI Fits Train Truck Van
4 Trumpet Air Horn Compressor Tank Gauge Kit 1.6Gal 150PSI Fits Train Truck Van
4 Trumpet Air Horn Compressor Tank Gauge Kit 1.6Gal 150PSI Fits Train Truck Van
4 Trumpet Air Horn Compressor Tank Gauge Kit 1.6Gal 150PSI Fits Train Truck Van
4 Trumpet Air Horn Compressor Tank Gauge Kit 1.6Gal 150PSI Fits Train Truck Van
4 Trumpet Air Horn Compressor Tank Gauge Kit 1.6Gal 150PSI Fits Train Truck Van
4 Trumpet Air Horn Compressor Tank Gauge Kit 1.6Gal 150PSI Fits Train Truck Van

4 Trumpet Air Horn Compressor Tank Gauge Kit 1.6Gal 150PSI Fits Train Truck Van    4 Trumpet Air Horn Compressor Tank Gauge Kit 1.6Gal 150PSI Fits Train Truck Van

Identify a suitable area for mounting, preferably an unobstructed sheet-metal surface like the frame or body of the vehicle so as to provide a firm platform which will help protect the horn from damage due to excessive shaking. Do not attach the horn to any plastic or other flexible material. Using the back bracket as a guide estimate and mark the positions for the holes, then perforate to size using a drill. Move the support bracket towards the trumpet's opening until is tight, then mark the hole and drill.

Use the provided mounting hardware to fasten the horn. 4 Trumpet Air Horn Compressor Tank Gauge Kit 1.6Gal 150PSI Fits Train Truck Van.

On one side of the included 3/8 OD air line, attach the compression nut and force the air line upon the male inlet fitting which is found on the electric solenoid valve. Pass the brass nut through the inlet fitting and fasten. Take the air line's other side and place the compression nut of the air tank fitting on it. Force the air line onto the male fitting of the tank and then fasten the compression nut.

WARNING: Avoid tying the brass nut too tight. Wire one of the solenoid valve's leads to the positive (+) terminal of the battery or alternator. WARNING: We highly recommend that you use a 10A fuse (not provided) to assure that the circuit remains safe and will not be damaged by excess current.

Wire the other lead of the solenoid valve to one of the terminals on the horn button. Ground the other terminal on the horn button by wiring it to bare metal. This powerful triple trumpet air horn produces a loud roaring sound. Black color, made entirely of metal for maximum protection against all weather conditions. Horn comes with a 12V/24V solenoid, hose and mounting hardware.

An on-board air system is required for operation. Ideal for all vehicles with a 12V/24V system. This horn is sure to draw all the attention you are looking for.

Avoid dismantling this horn's electrical elements. Avoid touching compressor components with your bare hands immediately after or during use. Avoid setting up any parts of the horn where there is a risk of falling off or risk of coming in contact with water. Set the horn up for use only in areas with adequate ventilation. Avoid sounding the air horn when in close range to your ear(s) or the ear(s) of others.

Make sure your battery ground is detached before getting your installation started. Employ equipment for eye protection during drill operations. Ensure that your air system has no pressure before starting the installation. The specific voltage requirement for this horn is 12/24 volt DC, therefore installation must be done to a DC power source of 12/24 volts. The Horn is the perfect addition to 12V or 24V vehicles.

6.5"/9.06"/11.61"/13.78"3.54. 14.96"x5.51"x11.81.

Please Refer To Your Government Official Website. We Would Appreciate it If You Could Do The Same.

All of Our Items Are 100% Brand New, We Do Not Sell Anything Other Than That. Your Questions/Concerns Will Be Responded Within 24 Hours Monday To Friday. Some of Our Items May Not Be Legal For Street Use in Some States. It is Your Responsibility to Check Your Local Law Enforcement for Street Use. We Will File Damage Or Lost Claim For Our Buyers And Guaranteed Buyers Will Receive Products In A Timely Manner.

Please Read The Item Description And See if The item Fits Your Vehicle Exactly. Mirrorzone's mission is to bring the best quality automotive Mirrors to our customers with satisfaction. Throughout the process of quality control, research and developing with the factories and suppliers and our passion of automotive parts, we are confident that we can continue to innovate our products and provide the best automotive parts online shopping experience to our customers. Nerf Bars And Running Boards. MIROZO Hydraulic Pull Back Ram 10 Ton Porta Power Frame Machine Puller Body Shop. MIROZO Spoiler Wing for 97-01 Honda CRV Factory Style Lightweight Rear Primed. 2 Pcs Door Lock Actuators Driver Passenger Side For Buick Allure LaCrosse 931313.
4 Trumpet Air Horn Compressor Tank Gauge Kit 1.6Gal 150PSI Fits Train Truck Van    4 Trumpet Air Horn Compressor Tank Gauge Kit 1.6Gal 150PSI Fits Train Truck Van