65-72 Chevy C10 Front Rear Air Bag Suspension Bolt On Kit Tank Gauges Compressor

  

1965 - 1972 Chevy C10. 1965 - 1967 Chevy C10 Panel.

1965 - 1966 Chevy Suburban. 1967 - 1972 Chevy C10 Suburban. 1965 - 1966 GMC Suburban. 1967 - 1972 GMC C15/C1500.

1967 - 1972 GMC C15/C1500 Suburban. 1 - Set of Front Bag Mounts and Brackets. 1 - Set of Rear Bag Mounts and Brackets. 1 - Gauge Panel w/ Mounting Tab.

4 - Air Lift D2600 Dominator Air Bag Springs. 4 - Air Lift Manual Paddle Valves. 1 - Viair 40 Amp Relay. 1 - Viair Pressure Switch.

1 - 200 PSI Air Tank. 1 - Viair 444C Compressor.

2 - Dual Needle BLACK Face Pressure Gauges. 1 - McGaughys Panhard Bar Adjustable.

50 - Feet 1/4 Air Line. 4 - 1/2" NPT to 1/4" PTC Bag Fittings. All Bolts, Nuts, and Washers to Install. 188 CRS (Cold Rolled Steel). Manufactured in the USA by Grunion Fabrication. Mounting Flange Depth: 1.125 w/ 2 Holes. Manufactured by Grunion Fabrication in the USA. Requires 1/8 Female NPT Compression Fitting for Installation (NOT INCLUDED). 2 - 1/8 Male NPT on Back Side. Face Diameter - 2.0625. Switch / Valve allow you to control Airflow from Tank to Bags. Does not require Electrical hook up. Raise or Lower your truck in approximately 8 seconds. Side Push Tabs to snap in place. Air Line / Fitting Specs. 1/8" OD Air Line - Use 1/8" PTC x 1/8 Female NPT. 1/4" OD Air Line - Use 1/4" PTC x 1/8 Female NPT. Before any attempt at installation, consult w/ a professional installer. In this connection, the user assumes all responsibility and risks. No Guarantees are made in reference to any specific class legality of any component.

ALL PRODUCTS ARE INTENDED FOR TRACK OR OFF-ROAD USE AND MAY NOT BE LEGAL TO USE ON THE HIGHWAY. The products offered for sale are true track and off-road components and, in all cases.

Require Installation and or Fabrication SKILL. No product or service is designed or intended to PREVENT injury or DEATH.

Images are for illustrative purposes only, parts come in raw metal.